Pass Cisco CCNP 300-115 Exam in First Attempt Guaranteed!
Get 100% Real Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
30 Days Free Updates, Instant Download!
PrepAway Cisco CCNP Switch Certification Practice Test Questions Part 3 300-115 Exam
Which command is used for testing reachability of two devices?
- A. Traceroute
- B. Ping
- C. Show
- D. Configure Terminal
- E. Hostname
Ping or Packet Internet Groper is used to check reachability of device using IP address. Using this command one can find out the round-trip time for messages sent from one host to another host and the same is echoed back to the source. Here the host sends an ECHO request and the remote host sends an ECHO reply. Using ICMP one can easily determine the mean round trip time.
a. Traceroute is used to check path of packet to reach destination. It determines the round-trip time for all the intermediate devices across a path and it continues till it reached the destined host or till the time all three packets are lost more than twice. It can be used to determine the reachability however PING sounds like a better option here.
c. Show is used to see specific configurations or running configuration of a device and is never used to test reachability of devices. For example: Show running-configuration will show the configuration on the router or switch or firewall and will not do anything related to the reachability.
d. configure terminal is used to enter configurations mode and run commands to configure devices. Using this mode commands need to be written to the running configuration file as soon as you enter them (using the Enter key/Carriage Return).
e. hostname is a command used to change hostname of device so that the device can be easily identified in a large network
Cisco CCNP Certification Exam 300-115 Practice Tests
- CCNP Practice Test 1
- CCNP Practice Test 2
- CCNP Practice Test 3
- CCNP Practice Test 4
- CCNP Practice Test 5
- CCNP Practice Test 6
- CCNP Practice Test 7
- CCNP Practice Test 8
- CCNP Practice Test 9
- CCNP Practice Test 10
About 300-115 Exam
The Cisco 300-115 exam is the second of three tests that an individual should pass in order to obtain the Cisco Certified Network Professional (CCNP) Routing and Switching and Cisco Certified Design Professional (CCDP) credentials.
The Cisco 300-115 SWITCH exam is made up of 30-40 questions. The multiple-choice questions require you to give multiple answers. There are also scenario-based questions, fill-in-the-blank, and drag and drop. The duration of the test is 120 minutes. It is available in English and Japanese. Currently, there is no passing score that has been published by Cisco. The purpose of this certification exam is to test one’s capability to plan, configure, verify, implement, and troubleshoot complicated LAN switching solutions in an enterprise setting. These solutions are for enterprises that operate with the Cisco Enterprise Campus Architecture. In addition, the test covers largely secure WLANs and VLANs integration.
The topics of the 300-115 exam act as guidelines for the candidates, so that they know what to focus on in their training. Although the content of the test may change and other related topics may be added, these are the general topics you can expect to find in this exam:
The study resources for the 300-115 exam should be Cisco-approved in the sense that they should be official study guides or other Cisco partner learning materials. It is a good idea to visit the Cisco Press website.